| 1. | The ultimate goal of a simulation is to approximate chamber pressure so as to detect and define the source of undesired pressure variation . 模拟的主要目标是在接近室压下探测和确定不希望有的压力变化的来源。 |
| 2. | Test method for leaks using the pressure change measurement 用压力变化测量检测漏泄的试验方法 |
| 3. | Non - destructive testing - leak testing - pressure change method 无损检验.泄漏检验.压力变化方法 |
| 4. | Pressure variation on shallow water bottom caused by moving ship 航行船舶在浅水水底引起的压力变化 |
| 5. | The gasket can be used for a wide temperature and pressure range 适用于温度、压力变化范围较大的工况。 |
| 6. | Analysis on change pattern of air temperature and pressure in oil tanks 油罐内气体空间温度与压力变化规律分析 |
| 7. | It is important that operators be aware of these expected pressure changes 设备操作人员应知道压力变化的现象。 |
| 8. | Effect of condenser pressure variation on unit power increment calculation 凝汽器压力变化影响机组功率增量计算的研究 |
| 9. | A test on pressure variation in tunnels with high - speed trains passing through 高速列车通过隧道时隧道内压力变化的试验研究 |
| 10. | Research on variation laws of water and earth pressure in construction stage of deep foundation pit 深基坑施工阶段水土压力变化规律研究 |