Mobile
Log In Sign Up
Home > chinese-english > "加力燃烧室" in English

English translation for "加力燃烧室"

afterburner
augmentor duct
augmentre
booster engine
reheat chamber
reheater
tail pipe burner
tailpipe burner
tailpipe chamber
tailpipeburner
thrust augmentor


Related Translations:
加力角:  angle of application
加力范围:  reheat range
加力阶段:  stage of reheat
加力火箭发动机:  thrust-augmented rocket
加力燃料:  afterburner fuelreheat fuel
低速加力:  low servo
升压加力:  boosting
加力燃气轮机:  booster gas turbine
运气加力:  ki strength
亚加力:  acrylics polymethyl methacrylate
Example Sentences:
1.Many jets have an afterburner .
许多喷气机都有加力燃烧室
2.Owing to the high proportion of unburnt oxygen in this efflux, afterburners are often provided in the jet-pipe .
由于这种喷气流中含有大量未燃烧的氧气,在喷管中往往安装加力燃烧室
3.In consequence of having to use after - burners more fuel is consumed
由于必须使用加力燃烧室,消耗了较多的燃料。
4.In consequence of having to use after - burners more fuel is consumed
不得不使用加力燃烧室,结果燃料消耗量增加了。
5.After - burners have to be used . as a result fuel consumption is heavier
不得不使用加力燃烧室,结果燃料消耗量增加了。
6.Numerical simulation of two - phase turbulent combusti on flow in an afterburner under generalized nonorthogonal curvilinear coordinate systems
非正交曲线坐标系数值模拟加力燃烧室湍流两相流燃烧
7.Under the two - dimensional body - fitted coordinate , large - eddy simulation ( les ) of turbulent chemically reacting flows in the model afterburner with the v - gutter flame holder was carried out by using parallel computing
本文在二维贴体坐标系下,对一带v型稳定器的模型加力燃烧室燃烧流场采用大涡模型进行了并行数值模拟。
8.In arbitrary curvilinear coordinates , the wall function is used for treating near wall regions . the influences of two different inlet gas parameter distributions and turbulent combustion models , as well as three different afterburners on turbulent combustion flow fields and wall temperature profiles are calculated . comparisons of experiment results and calculations results show that second - moment combustion model is reasonable for modeling turbulent reacting flows , inlet gas parameter distributions is more important . calculation method is reliable and can be used for the optimum design of afterburner
数值研究三种不同几何形状、两种进口气流参数分布、两种紊流燃烧模型等对加力室内各气流参数、隔热屏和加力室筒体壁面温度分布的影响,计算结果与试验数据比较表明:不同几何形状加力室对加力室内紊流燃烧流场的影响要比进口气流参数分布大些,正确给定进口气流参数分布较为重要,二阶矩紊流燃烧模型更适用摸拟三维紊流燃烧流动,计算方法合理,编制的计算程序可靠,可供加力燃烧室优化设计用。
9.In arbitrary curvilinear coordinate systems , three dimensional turbulent combustion flow fields of the three kinds of turbofan engine afterburner with the longitudinal heat shield 、 outer cold flow and the jet nozzle are simulated . the three - dimensional body - fitted grids are generated by an elliptical grid generation procedure and zone method
本文在任意曲线坐标系统下对三种带有纵向隔热屏、外冷却通道和尾喷管的涡扇发动机加力燃烧室的三维紊流燃烧流场进行数值模拟。
Similar Words:
"加力燃料压力" English translation, "加力燃气轮机" English translation, "加力燃气涡轮机" English translation, "加力燃烧" English translation, "加力燃烧器原理" English translation, "加力燃烧室的燃油调节器" English translation, "加力燃烧室点火" English translation, "加力燃烧室点火器" English translation, "加力燃烧室电门" English translation, "加力燃烧室定额功率" English translation