English translation for "前轮定位"
|
- front alignment
front wheel alignment
wheel alignment
Related Translations:
前轮舱: nose gear nacellenose-wheel baynose-wheel housing 前轮叉: front forknose-wheel fork 抬前轮: nose liftoffrotate the 前轮制动: fwb front wheel brake 前轮架: fore carriageforecarriage 前轮轮胎: nose tirenose-wheel tire
- Example Sentences:
| 1. | Later , the relationship between front wheel alignment parameters and tire wear is analysed by studying the tire model
然后从轮胎模型入手分析前轮定位参数同轮胎磨损的关系。 | | 2. | It also use adams _ car to build the kinematics model of front suspension , studying the varying rule of front wheel orientation parameter
应用adamscar模块建立了前悬架运动学模型，探讨了前轮定位参数的变化规律。 | | 3. | It use adams to simulate the front suspension kinematics and gain the rule of suspension frame affecting the front wheel orientation parameter
对前悬架进行了运动学仿真分析，得到了悬架结构对前轮定位参数的影响规律。 | | 4. | The method of independent suspension design is studied in detail and the relation among suspension movement , front wheel alignment parameters and tyre wear is analysed in this paper
本文主要研究轻型汽车前独立悬架的设计分析方法以及轮胎磨损与悬架运动、前轮定位参数的关系。 | | 5. | Then the math model of the relationship between the front wheel aligning parameters and tyre wear is obtained by taking the side slip angle of tyre as medium parameter , and the computer simulation is made
并以轮胎侧偏角为中间变量，建立了前轮定位参数同轮胎磨损之间关系的数学模型，进行了计算机仿真计算。 | | 6. | In the process of building model , the method of using experiments to collaborate with computer to acquire parameters was used . the front wheel orientation parameter , the absorber damp speciality and the quality of parts were all acquired by actual measure . the spring rigidity etc are acquired by calculation
本文在模型建立过程中，采用试验与计算相结合的办法获取各种参数，前轮定位参数、减振器阻尼特性、零部件的质量均通过实际测量获得，弹簧刚度等通过计算获得。 | | 7. | The kinematic performance of the macpherson suspension on a real vehicle is studied , and the changes of the front wheel alignment and the motion of the front wheel in the longitudinal and the transversal directions are figured . based on the requirements of general layout , a constrained optimization design model is set up with the steering cross rod ball joint position as the optimization variables ( design parameters ) , and the sum of steering cross rod length interference while the left front wheel turning and bouncing as the objective function . and the optimization results are worked out by programming on computer
针对一种实际车型上的麦弗逊式悬架，计算分析了转向轮跳动时前轮定位角和车轮横向、纵向滑移量的变化情况，并根据实际车型上麦弗逊式悬架的空间布置要求，建立了以转向横拉杆断开点空间位置坐标为优化变量，转向横拉杆断开点空间布置坐标可变化范围为约束条件，车轮转向和跳动时转向横拉杆长度干涉量为目标函数的约束优化设计模型。 |
- Similar Words：
- "前轮传协式搂草机" English translation, "前轮大后轮小的自行车" English translation, "前轮挡油毡垫" English translation, "前轮调正" English translation, "前轮定" English translation, "前轮定位，前轮校准" English translation, "前轮定位工具" English translation, "前轮定位试验器" English translation, "前轮定位仪" English translation, "前轮动作筒" English translation
|
|
|
