| 1. | Design criteria for consolidation of lwr spent fuel 轻水反应堆废燃料压实的设计准则 |
| 2. | Matrix for lwr spent fuel receiving and storage 轻水堆废燃料接收和贮存用容器 |
| 3. | To be responsible to accomplish extrusion powder lwr in time 及时完成铝型材粉末实验室工作 |
| 4. | Study of the strategy for soccer robot to meet an emergency based on lwr 方法的足球机器人应急策略研究 |
| 5. | Handling , storage , and transportation of lwr fuel outside reactors , criteria for 反应堆外部的轻水反应堆燃料的搬运贮藏和运输准则 |
| 6. | Technical rules for discharge system of radioactive waste water from lwr nuclear power plant 轻水堆核电厂放射性废水排放系统技术规定 |
| 7. | Calculation and measurement of direct and scattered gamma radiation from lwr nuclear power plants , Lwr核电站直接的和散射的伽马辐射的计算和测量 |
| 8. | Nuclear criticality safety for fissile materials outside reactors - criticality safety criteria for the handling , storage and transportation of lwr fuel unit outside reactors 反应堆外易裂变材料的核临界安全堆外操作贮存运输轻水堆燃料单元的核临界安全准则 |
| 9. | The power fluctuation and flow - induced vibration make the fuel assembly and other components deformed cyclically under the lwr operating condition , even failed in the severe cases 反应堆运行时,堆功率的波动和水冷却介质的流动使燃料组件及其它构件经受不同形式的循环变形,在极端情况下容易出现破损。 |
| 10. | Zirconium alloys are employed extensively in light water cooled reactors ( lwr ) as the cladding materials of fuel elements and other structural materials because of the low capture cross - section for thermal neutrons , good resistance to water - side corrosion at elevated temperature , adequate mechanical properties and high thermal conductivity 由于锆的热中子吸收截面小,并具有优异的耐高温水腐蚀性能、良好的综合力学性能和理想的热导率,因此,锆合金被用作核电站水冷动力堆核燃料元件的包壳材料和堆芯的其它结构材料。 |