总变形 meaning in English
general yielding
total deflection
total deformation
total strain
Examples
- The extra movement was found to be about 30 % of the total displacement
由本研究之案例得知,土壤潜变引致之额外的壁体变形约?总变形的30 % 。 - Finally , the total mechanical deformation of seal rings can be obtained by superposition of the results due to the external loads and the edge loads respectively
最终,对应地迭加在外载荷及边缘载荷作用下的变形数据,即可求出密封环端面的总变形值。 - The swelling is the secondary reason for large deformation . by the elasticity - plastic fem analysis and the flow deformation analysis through inspecting system to the rock ii3 , getting that the total deformation is within the quantity set aside
通过对鹧鸪山隧道_ 3围岩变形性状进行弹塑性有限元数值计算并利用监控量测资料进行软岩流变分析,得出其总变形在预留变形量之内。 - It was found that longer surcharge preloading duration could make the total magnitude of deformation of soft clay larger , and the more surcharge preloading duration and the larger opr , the less magnitude of secondary compression deformation of soft clay after unloading was , compared with that under permanent pressure loading
研究表明,超载作用时间过长会使地基的总变形量增加,相对于等载预压过程,超载的作用时间越长、超载比越大,超载卸除后的次压缩变形越小。 - Simulated results showed that the position and the evolution process of necks are influenced by tensile strain rates . uniform deformation covers only a small fraction of the total deformation . however , at the steady - like flow stage , restrictions and accommodations between scattered localizations promote large uniform deformation
数值结果表明,颈缩的位置及发展过程受拉伸应变速率影响,完全均匀变形在总变形中实际占份量较小,而似稳流动阶段的分散不均匀性的相互牵制与协调,使率敏感材料得以在接近均匀的状态下经受大的变形。