变形区 meaning in English
deformation area
deformation zone
deformed area
distorted area
zone of deformation
Examples
- It is clearly that only two geometrical parameters i . e . maximal misalignment angle ( ) and distortion width ( s ) need to be determined experimentally
纤维弯曲模型（ fdm ）只有两个几何参数（最大纤维偏转角和变形区宽度）需要由实验确定。 - There are four zones in slide mass with different deformation , deformation degree of these four zones are undeformation , light , weak and strong
根据滑体的变形迹象与变形程度将古滑体分为未变形区、轻微变形区、弱变形区和强变形区四个区域。 - From ansys solver , aluminum alloy rivet ' s minimal ratio is 5 to finally , we have made some experiments by using aluminum alloy and stainless steel rivets
对5mm的铝合金铆钉，铆接变形区最小径高比为5 ： 4 。使用铝合金和不锈钢铆钉进行电磁铆接实验。 - When severely distorted elements appear , the meshes in the window are regenerated by the advancing - front method and flow properties are interpolated from the old mesh to the new one linearly
当出现严重扭曲的网格单元时，采用阵面推进法重新生成变形区内的网格，并通过线性插值传递流动信息。 - To eliminate the residual stress formed during the process of al board cold rolling , the distribution of stress in the deformation region was stimulated by elas - plastics large deformation finite element analysis
摘要?消除铝板冷轧过程中?生的残馀应力，采用弹塑性大变形有限元法对变形区内残馀应力的分布进行数值模拟。