dynamic mathematical model meaning in English
动力数学模型
Examples
- Comparing the simulation curves with experiment curves , we found that they are similar . therefore , the dynamic mathematical model of the boiler steam - water system and its corresponding simulation model are valid
通过仿真曲线与实验曲线对比可知，仿真曲线与实验曲线变化趋势基本一致，说明所建立的船用锅炉汽水系统数学模型以及基于该模型的仿真符合实际系统。 - A dynamic mathematical model of an air source heat pump water chiller / heater ( ashpwch ) under frosting was developed by connecting several of its component models according to principles of mass , momentum and energy conservation
摘要在空气源热泵冷热水机组各部件模型的基础上，基于质量守恒定律、动量守恒定律和能量守恒定律，将这些部件模型有机地结合起来，建立了机组结霜工况下的动态数学模型。 - A dynamic mathematical model for high - consistence pulp refining process , with flow rate of pulp , flow rate of white water , power of disc refiner as the model inputs , and specific energy , specific edge load , concentrator level as the model outputs , is presented based on specific edge load ( sel ) theory
研究了高浓打浆过程的建模问题，提出了基于比边缘负荷理论( specificedgeloadtheory ，简称sel理论)的高浓打浆过程动态数学模型及成浆质量预报模型。 - Fifth , with the comparison between results of simulation calculated and experimental results , the dynamic mathematical model in this thesis is proved to be reliable , correct and sensitive to some parameters . the results can be applied to system simulation
同时也可实现对制冷系统从开机到停机全过程进行时时检测和仿真； 5 )通过比较蒸发器仿真计算结果和实验结果，证明本文所建立的蒸发器动态数学模型的正确性和可靠性及对某些参数的良好敏感性，可用于系统仿真。 - A kinetic characteristics algorithm of furnace combustion based on steady state is established , and a dynamic mathematical model of 450t / h cfb boiler made in china is developed in this paper . the model not only integrates the update theories and results of previous studies on the partial aspects , but also considers the main process in cfb boiler including flow , coal distribution , devolatilization of coal , char combustion , heat transfer and so on , and further improve the existing model of combustion kinetic characteristics
本文以国产450t h循环流化床电站锅炉为研究对象，在前人对循环流化床内部各种单独过程及模型化研究成果的基础上，深入考虑了燃煤粒径分布、流动、挥发分释放和燃烧、焦炭燃烧、传热等循环流化床内部进行的主要过程，进一步完善了炉内燃烧动态特性的数学模型。