磨损过程 meaning in English
wear process
Examples
- As a matter of fact , information characteristics are limited by using a single monitoring technique in order to diagnose the type of wearing parts , degree of wear and wear process
事实上，单一油液监测方法所能捕捉的信息特征是有限的，不能准确诊断出零件磨损的种类、磨损程度和磨损过程等。 - The infrared analysis show that the a small quantity of transition of crystal form from a into y of nylon and its composites happen during dry friction because of the high temperature and strong sheering strength
红外分析显示在干摩擦磨损过程中，磨损表面在高温及强剪切力的作用下，发生了少量晶型到晶型的转变。 - It is believed that the exposure of highly reactive surfaces during the wear process along with the high temperatures at asperity contacts act to " polymerize " the fluid , forming a viscous sludge , which inhibits bearing rotation
研究表明，高温下的金属表面在磨损过程中会产生粘稠的“聚合物”物质，形成粘稠的油泥，阻碍了轴承旋转。 - According to the relation between gear wear and its vibration , continuous wavelet transform is introduced to estimate the wear condition , the energy values of continuous wavelet on scale fit a spline which is much like that of the wear course of the gear
最后，将基于连续小波变换的信号处理方法引入变速箱齿轮的磨损估计。根据信号的连续小波变换的能量谱对尺度的积分值，拟合得到齿轮的磨损过程曲线。 - Because self - compensation repairing film was produced more and more and was rubbing out more and more by friction , abrasion only occured in the self - compensation repairing film and negative abrasion was produced when the film producing abrasion speed was more than abrasion speed
由于在摩擦过程中自补偿膜不断生成，同时又不断被磨损，当成膜率大于磨损率后，不仅磨损过程完全在自补偿膜内进行，而且还会出现负磨损现象，产生自补偿修复效应。