| 1. | Metal sleeves fastened around their stems .
金属套简包着树干。 |
| 2. | A safety pin has a metal covering over the pointed end
安全别针在尖端有一个金属套。 |
| 3. | Socketing procedure for wire ropes on cable cars - molten metal socketing
缆车用钢丝绳索的套接方法.熔融金属套接 |
| 4. | Protective coverings for electric cables - part 2 : general protective coverings for cables with metallic sheath
电缆外护层第2部分:金属套电缆通用外护层 |
| 5. | Copper or aluminium conductor paper - insulated power cables with rated voltages up to 35kv - part 3 : resin oil impregneted paper - insulated metal - sheathed power cables
额定电压35 kv及以下铜芯铝芯纸绝缘电力电缆第3部分:粘性油浸纸绝缘金属套电力电缆 |
| 6. | Copper or aluminium conductor paper - insulated power cables with rated voltages up to 35kv - part 2 : non - draining oil impregnated paper - insulated matal - sheathed power cables
额定电压35kv及以下铜芯铝芯纸绝缘电力电缆第2部分:不滴流油浸纸绝缘金属套电力电缆 |
| 7. | Calculation of the current rating of electric cables . part 1 : current rating equations 100 % load factor and calculation of losses . section 2 : sheath eddy current loss factors for two circuits in flat formation
电缆载流量计算.第1部分：载流量公式100 %负荷因数和损耗计算.第2节：双回路平面排列电缆金属套涡流损耗因数 |
| 8. | Rectangular connectors for frequencies below 3 mhz ; part 2 : detail specification for a range of connectors , with assessed quality , with trapezoidal shaped metal shells and round contacts ; fixed solder contact types
频率低于3mhz的矩形连接器.第2部分:带质量评定的带梯形金属套和圆形接触件的连接器系列的详细规范.固定的的钎焊接型 |
| 9. | Rectangular connectors for frequencies below 3 mhz - part 2 : detail specification for a range of connectors , with assessed quality , with trapezoidal shaped metal shells and round contacts - fixed solder contact types ; amendment 1
频率低于3mhz的矩形连接器.第2部分:带质量评定的带梯形金属套和圆形接触件的连接器系列的详细规范.固定的钎焊接型.补充件1 |
| 10. | The study of the effect of material properties and dimensions and loading currents on liner buckling , using a capacitor bank as a driver , indicates that the mode number for buckling increases with the ratio of radius to thickness of a liner , and the yield strength to plastic hardening modulus , but keeps invariable with the increase of loading current , and that the magnitude of buckling increases with the loading current
用电容器组脉冲发生器装置作为驱动源，设计4种不同材料、不同尺寸的金属套简，通过调节电容器组的充电电压得到不同的加载电流，研究材料及几何参数、加载脉冲特性对套简屈曲的影响；采用瞬态非线性有限元方法对实验结果进行了数值模拟。 |
