| 1. | Often , it is easier to test each component along a fault line in isolation
沿着故障线路隔离测试每个组件通常更容易。 |
| 2. | When single phase earthed fault occurs , it is necessary to select the fault circuit quickly
而尽快选出故障线路，对于系统的运行具有重要意义。 |
| 3. | So the line which the one - phase ground fault take place can be discriminated by these
因此可以利用双回线路中的零序电流相位差值的变化趋势来识别故障线路。 |
| 4. | A classic example of such a fault line would be the interface between a gui view and its model
这种故障线路的一个典型示例是gui视图和它的模型之间的接口。 |
| 5. | Find the fault lines of your program , then use mediators with forwarding functions to quickly access aggregate components
找出程序的故障线路，然后用具有转发功能的调节器快速访问聚合组件。 |
| 6. | When single phase to earth fault occurs on a neutral non - direct grounded power system , it is necessary to select the fault circuit quickly
小电流接地系统发生单相接地故障时，尽快选出故障线路，对于系统的运行是具有重要意义的。 |
| 7. | Based on the traveling wave , double ended approach only deals with the first transient traveling wave reaching the two buses of the fault line
摘要基于行波的输电线路双端测距算法只用到到达故障线路两侧母线的第一个故障初始行波波头，其可靠性较高。 |
| 8. | By " fault lines " i mean the interfaces between separate components that have little interaction compared with the internal interaction of their respective subcomponents
我用“故障线路”来指独立组件之间的接口，独立组件之间和组件与其相应子组件之间相比，很少有交互。 |
| 9. | So it can be used for single - phase fault identifying . this paper discusses the size of the negative current and the method of analyzing it . numeral simulation shows the feasibility of it
由于负序电流在故障线路和非故障线路上具有显著差异，故本文也研究了将负序电流作为故障特征量的可行性。 |
| 10. | The single - phase grounding fault frequently occurs in neutral ungrounded system , the fault line and fault location must be found to avoid a phase - to - phase short as soon as possible
单相接地故障在小电流接地系统中出现的比较频繁，此时必须尽快找到故障线路以及大致的故障点，以避免两相对地短路。 |
