Chinese translation for "探伤检查"
|
- defect detecting test
Related Translations:
探伤: [冶金学] flaw detection; detection of defects; fault localization; crack detection◇探伤器 crack detector; 探伤仪 detector of defects; flaw detector 无损探伤: [冶金学] nondestructive inspection; nondestructive test◇无损探伤法 method of nondestructive inspection; 无损探伤技术 nondestructive testing technique; 无损探伤仪 harmless flaw detector 荧光探伤: fluorescent crack detectionfluorescent flaw detectionfluorescent inspectionfluorescent testfluoresent flaw detectionfluouesint crack detectionflurescent penetrant inspection 超声探伤: ultrasonic detectionultrasonic flaw detectionultrasonic inspectionultrasonicflawdetection 探伤灵敏度: flaw detection sensitivityworkingse itivity 磁力探伤: magnaflux inspectionmagnaflux testmagnetic crack detectionmagnetic crack testmagnetic defectoscopymagnetic flaw detectingmagnetic flaw detectionmagnetic inspectionmagnetic particle inspect 探伤检验: defectoscopyflaw detection
- Example Sentences:
| 1. | Longitudinal and circumferential weld seams are pl inspected for class 150 # , for other classes will be inspected with x - rays and / or us
过滤器之纵向和周围焊接缝是染色探伤检查，其它将以x -射线和/或超音波检查。 | | 2. | Weld positioning under load without installation , seam thickness of the seam thickness of not less than two - thirds of the design , not to exceed 8 mm , should not be less than 25 mm in length weld , located in welds inside
安装定位焊缝不需承受荷载时,焊缝厚度不少于设计焊缝厚度的2 / 3 ,且不大于8 ? ,焊缝长度不宜小于25 ? ,位置应在焊道内.安装焊缝全数外观检查,主要的焊缝应按设计要求用超声波探伤检查内在质量.上述检查均需做出记录 |
- Similar Words：
- "探伤方法" Chinese translation, "探伤钩" Chinese translation, "探伤机" Chinese translation, "探伤技术" Chinese translation, "探伤记录" Chinese translation, "探伤检验" Chinese translation, "探伤结果" Chinese translation, "探伤灵敏度" Chinese translation, "探伤面" Chinese translation, "探伤器" Chinese translation
|
|
|
