| 1. | There will be no shear on this surface .
在该表面上没有剪切作用的存在。 |
| 2. | The shear of woven fabrics results largely in the alteration in the angle between warp and weft yarn .
机织物的剪切作用，大部分由经纱和纬纱之间角度的改变所形成。 |
| 3. | Beveled gate provides positive shearing action
斜面闸板提供刚性剪切作用。 |
| 4. | Basic dyke swarms ; round columnar joints ; cool shrink ; viscous shearing
基性岩墙群圆柱状节理冷却收缩黏滞性剪切作用 |
| 5. | Radial flow type . gaining large cycle flow with baffle ' s cooperation
径流型，配合挡板可得上下循环流，循环量大，剪切作用好。 |
| 6. | Precision - machined , bottom and top edges provide shearing action for pulp stock and slurry
底部和顶部边缘经过精密机加工，对纸浆原料和浆液具有剪切作用。 |
| 7. | When the sv - wave whose incidence is vertically propagates from the bottom , with water ' s no burdening shearing stress , the respond of displacement or acceleration on surface is the same
Sv波垂直从底边界入射时，由于水并不能承受剪切作用，所以两相介质和单相介质对地震波的传播影响一致。 |
| 8. | The round columnar joints are one of the flow structures showing the horozontal emplacement of basic dyke swarms . the round columnar joints show that the basic dyke has rheological behaviour of the viscous shearing in magma emplacement
岩墙发育圆柱状节理表明出露的是岩墙的顶部，反映基性岩墙群侵位时岩浆具有黏滞性剪切作用的流变学特征。 |
| 9. | The unstable stacking of layers of org - mmt was easily damaged under force and heat . hence , it is very important to decide the process temperature for preparing the composites , and it was found that 200 was a upper limitation of temperature
由于在高热( 200以上)或强机械剪切作用下，蒙脱土层状堆叠结构会坍塌，导致不能与聚合物分子作用生成聚合物?层状硅酸盐纳米复合材料，因此熔融插层的温度选择显得十分重要。 |
| 10. | Furthermore , shear type is simple shear - dominated at the early stage by analysis of wk from the method of polar mohr and pure shear component increases at the late stage by the methods of ecc . much synthetic extensional crenulation cleavage ecc is found in mylonitic rocks zone
不同方法求得运动学涡度wk介于0 . 453 ? 0 . 809间，表现为一般剪切作用类型，其中早期为以简单剪切组份为主、晚期为以纯剪组份为主的一般剪切作用类型。 |
