| 1. | Anti - tarnishing capacity of magnetron sputtered silver film in various gaseous and liquid mediums 磁控溅射镀银膜抗变色性研究 |
| 2. | Silver film electro - migration ion exchanged technology has been designed to make optical waveguide 实验上采用银膜电场辅助离子交换方法制作玻璃波导。 |
| 3. | Development of silver film via thermal decomposition of silver carboxylates for surface - enhanced raman spectroscopy 热分解羧酸银形成银膜技术的发展对表面增强拉曼光谱学的贡献 |
| 4. | Feasibly experimental projects of fabricating buried waveguides by field - assisted ion - exchanged technology using this equipment were designed . used thermal ion - exchange and the silver film ion - exchange technology , the planar and channel waveguides were fabricated 在实验室允许的条件下,采用ag膜电场辅助离子交换和熔盐离子交换法对铒镱共掺磷酸盐玻璃平板波导和沟道波导进行了制作。 |
| 5. | Their structures and optical properties were compared and analyzed . 2 the silver films were prepared at the room temperature and 77k on glass substrates . the microstructures and optical properties of the ag films were studied with the xrd , sem and ellipsometer , respectively 常温和77k温度玻璃衬底上金属( ag 、 cu )薄膜的制备,以及常温和77k玻璃衬底上ag薄膜的表面结构及光学性质的比较研究。 |
| 6. | The optical characteristics of metal silver film used as the reflective mirror of microcavity are calculated by characteristic matrix method and it is shown that the thickness of metal mirror affects not only the reflectivity but also the penetration depth and thus the cavity mode . this conclusion is confirmed by experiment 通过特征矩阵法计算了金属薄膜在光学微腔中的性质,得到了金属膜厚度不仅影响腔的品质因子,而且随金属膜厚度增加,由反射相移引起的等效穿透深度增加的结果,并在实验上进行了验证。 |
| 7. | The mode refractive index of 632 . 8nm wavelength , which propagates in ion - exchanged planar waveguides , is obtained by m line technology ; the serious problems of silver film ion - exchange also be pointed out . the refractive index profile of planar waveguide is obtained with inverse wentzel - kramer - brillouin method by measured mode refractive index . finally , some improvements of silver film ion - exchange is put forward 最后介绍了银膜电场辅助法制备光波导的试验过程,对实验获得的参数进行了分析和计算,得到了波导的模折射率和折射率变化的函数曲线,随后对在试验过程中遇到的一些问题和现象进行了阐述,分析了其产生的原因,并提出了自己的观点和改进的办法。 |
| 8. | Using the typical moled structure glass / dbr / ito / htl / eml ( etl ) / al , the el spectrum narrowing , intensity enhancement in the normal direction as well as emission intensity redistribution in space are observed . by the introduction of single layer silver film instead of the dbr / ito multilayer , a ( / 2 - length cavity is obtained . using this kind of microcavity , three - color single mode pl from a single material alq and three - color single mode el from double layers pvk / alq are achieved for the first time 通过以金属银替代多层结构的dbr / ito ,既作为反射镜,又作为el器件中的空穴注入电极,设计出腔长只有( / 2的超短微腔,采用同一种宽谱带材料alq作为光发射层,首次报道了三基色单模光致发光和pvk / alq双层结构的三基色单模电致发光。 |