| 1. | The insertion of the initial velocity is accomplished by offsetting the motor shaft position prior to the start of navigation .
初始速度的加入可以在导航开始前用预先装走马达轴的位置来实现。 |
| 2. | Analysis of torsion failure of motor shaft
电机主轴扭断原因分析 |
| 3. | In recording , a pulse derived from the rotation of a motor shaft
在记录技术中，由马达转动轴转动而产生的一种脉冲。 |
| 4. | Effect of driven - mechanism on natural frequency of torsional vibration of motor shaft
被驱动机构对电动机轴扭振固有频率的影响 |
| 5. | An investigation made into the fallure of motor shaft fit on 2zkx2148 linear vibration screen
2148型直线振动筛电机轴折断事故的探讨 |
| 6. | Ansys is used in calculating and analyzing the distortion of motor shaft and the stress of gear mesh
使用有限元软件ansys计算分析了3种结构的齿轮轴变形和齿轮啮合时的应力。 |
| 7. | A transparent , rotating mask ( with many fine opaque stripes ) attached to the motor shaft sits between them
透明的旋转光罩（上面有很多不透明细条纹）固定在马达之间的转轴上。 |
| 8. | This damage was often occ urred in the surface of bearing or gear that connected with motor shaft , induce the bearing or gear premature
这种破坏经常出现在电机的轴承或者是与电机主轴相连的齿轮齿面上，使轴承或齿轮的寿命大大缩短。 |
| 9. | Basically , a brushless dc motor consists of a permanent magnet ( pm ) synchronous motor , an inverter and a position sensor mounted on the motor shaft
通常的永磁无刷直流电动机由永磁同步电动机、逆变器以及安装在转子轴上的位置传感器构成。 |
| 10. | For motor shafts , the highest stress is at the boundary between the key groove and the ring groove ; the next one is at bottom and terminal of the spline . according to the results , the 17 . 4mm shaft is insecurity , the 22 . 2mm and 30 . 2mm shafts are security
在轴的安全性上，对17 . 4mm泵轴计算结果是不安全的；对22 . 2mm泵轴计算结果是安全的；对30 . 2mm电机轴计算结果是安全的，而且还有较大的功率输出空间。 |
