| 1. | 6 dust guard , blown down tank , machine frame
6防尘罩受料槽机架等。 |
| 2. | The composed parts of machine frame amd perforated knife roller are rough , with good antiseismic and stable , brisk operation
机架、打孔刀辊构件刚性高，抗震性能好，设备运转平稳轻快。 |
| 3. | This machine is easy to operate . with the elimination of stress on the machine frame , the machine has perfect stability
本机台操作简便，机台结构经应力消除稳定性能佳，设计合理，维修及保养方便， |
| 4. | The machine frame is made of high - quality wood and panel with good sealing high static electricity resistance and low noise
机体结构采用优质木材和多层木板，密封程度高，抗静电性能好，工作噪音小。 |
| 5. | 63 100 specification of flameproof motor for petrol filling machine part1 : ybjy series flameproof three phases asynchronous motor for petrol filling machine frame size 63 to 100
燃油加油机用隔爆型电动机技术条件.第1部分: ybjy系列燃油加油机用隔爆型三相异步电动机 |
| 6. | Manufacturing of stainless steel hopper and tank products stainless steel , aluminum , pipe products stainless steel , aluminum , sheet metal products , machine frames , and machine parts
不锈钢料斗及罐制品不锈钢，铝，管子不锈钢，铝，板金产品，机械框架，机械部品的制作 |
| 7. | Combined with temperature sensing head , paper cutter , controlling board , power supply , paper holder frame , machine frame together , which being convenient for installing in various machine cabinets
集热敏头、切纸刀、控制板、电源、托纸架、机架于一体，方便安装到各种机柜内。 |
| 8. | 16 thousand kn j53 - 1600c model double - disc friction spiral press adopts international advanced structural configuration on its machine frame , that is split body with 4 - pull rod pre - stressing force structure
J53 - 1600c型16000kn双盘摩擦螺旋压力机的机架采用国际先进结构形式，即分段机身四拉杆预应力结构。 |
| 9. | In this paper , the large non linear fem software marc be used to calculate the 3d deformed distribution of the cold roll forming machine frame , slide seat and bolster plate
摘要以大型非线性有限元软件marc为分析工具，建立接触分析模型，对冷滚轧机床机架、滑台及垫板进行三维有限元弹性接触分析，给出机床三维变形状态的定量描述。 |
| 10. | 1 driving part : this machine adopts triangle beltdouble - grade drive for shaft speed reducer , speed reducer is installed on shaft head of driving roller ; all driving devices are installed on the machine frame viahead sheave rack and motor rack
1驱动部分：该机采用三角皮带轴装式减速器两级传动，减速器套装在传动滚筒的轴头上全部传动装置通过头轮架和电机架悬挂安装在机架上。 |
