| 1. | Effect of electromagnetic stirring on solidification structure of casting
电磁搅拌对铸锭凝固组织的影响 |
| 2. | Experiments of improving inner quality of billet by electromagnetic stirring
电磁搅拌改善铸坯内部质量的实验研究 |
| 3. | Coupled analysis of magnetic field and fluid field in mould ems for square billet continuous casting
小方坯连铸结晶器电磁搅拌磁场和流场的耦合分析 |
| 4. | Particular requirements for installations for electromagnetic stirring , transport or pouring of metal liquids
对液态金属电磁搅拌输送或浇注设备的特殊要求 |
| 5. | Electromagnetic stirring may result in white bands in continuous casting billets , and their formation mechanism has not been determined
摘要电磁搅拌使连铸钢坯上产生白亮带，其形成机制目前尚无定论。 |
| 6. | Safety in electroheat installations . part 11 : particular requirements for installations for electromagnetic stirring , transport or pouring of metal liquids
电热设备的安全第11部分:对液态金属电磁搅拌输送或浇注设备的特殊要求 |
| 7. | It is believed that the slurry making method using electromagnetic stirring which is contactless stir ring will be suitable for high melting point iron and steel material
笔者认为电磁搅拌制备浆料方法中的搅拌是无接触搅拌，更适用于高熔点钢铁材料。 |
| 8. | The article have been discussed theoretically for some technology control system of continous casting , for example mould level control system , electromagnatic mould stirring system , soft - reduction , the secondary cooling water control ect
并对连铸一些特殊工艺控制如结晶器液位控制系统、结晶器电磁搅拌、轻压下、二冷控制等进行了理论探讨。 |
| 9. | The influences of the alloying elements of mn , ti , re , alternating current field ( acf ) , electromagnetic stirring and reheating on the morphology of the second phase of al - 20si - 5fe alloy are studied thoroughly
本文重点研究了mn ， ti ， re等合金元素、交流电场、电磁搅拌、熔体保温时间和二次加热等工艺对al - 20si - 5fe合金微观组织的影响。 |
| 10. | The process of copper metallizing of carbon powder was investigated . the hydrophilicity , sensitization , activation and reduction were also studied . the copper deposit could be made thicker by electromagnetic agitation
摘要研究了在碳粉表面电镀铜的工艺。首先对碳粉表面进行亲水、敏化、活化和还原处理，然后在其表面化学镀铜，形成导电膜，再采用电磁搅拌的方法电镀铜，使镀层加厚。 |
