| 1. | Resin anchor bolts - steel bars and accessories
树脂锚杆金属杆体及其附件 |
| 2. | The pressing monent ' s affaction on the face of anchor arm
按装力矩对锚杆杆体强度的影响 |
| 3. | Variation of bolt body strength under state of compound stress
复合应力状态下的锚杆杆体强度变化 |
| 4. | Cement anchor bolts - bars
水泥锚杆杆体 |
| 5. | En 2289 aerospace series . rod bodies in aluminium alloy for flight controls . technical specification
航空航天系列.飞行操纵系统用铝合金制杆体.技术规范 |
| 6. | The failure of reinforced plastic fiberglass sucker rod is classified into break and thread off , and the break of the rod body is the common failure pattern
玻璃钢抽油杆的失效类型分为断杆和脱扣两种，杆体的劈断和劈散是其最常见的失效形式。 |
| 7. | Masters telescopic poles are all made of 7075 tempered aluminium alloy : its mechanic resistance is 56 kg / mm2 f56 . shafts are strong and light , perfectly designed for trekking use
（铝材：杆体由7075韧性铝合金制造，完美融合了极轻的重量与极大的强度之特点，是户外旅行的专业之作。注：此段译文为网上找的，并非本人翻译。 ） |
| 8. | A simplified theoretical model has been established to describe the big yawed rod penetration into semi - infinite rolled homogeneous armor ( rha ) targets at normal incidence , the effect of ballistic yaw is quantitatively described in the rate of penetration
本文建立了大攻角的长杆体垂直侵彻半无限靶的简化物理模型，定量地分析了大攻角对垂直侵彻的影响。 |
| 9. | The pressure - type anchor rods are designed by ourselves through study some reference documents . the p ~ s curves are gotten . loading transmission characteristics of pressure - type anchor and tensile - type anchor are compared through the study of pull - out tests of those two types
在参考文献的基础上自己设计制作了压力型锚杆杆体，在试验中得到了相关的p s曲线，比较了两种锚杆的荷载传递性状，探讨了影响压力型锚杆承载力的因素。 |
| 10. | In the computation module , mindlin formula is applied to calculable the displacement of the rock ( soil ) . based on the presumption that the rock ( soil ) and the anchor has the same displacement at the interface , the equation of displacement of rock ( soil ) and the anchor is made
在该计算模型中，运用mindlin公式计算岩体位移，并基于在杆体与岩土体接触面上位移相等的假定与杆体的位移建立等式，进而求出沿杆体全长的剪力分布。 |
