Chinese translation for "形度"

physique inspection

Example Sentences:

	1.	The effect of spinning technology conditions on fiber shaped degree was simulated by using the stab1ished model 根据所建立的模型，模拟了纺丝工艺条件对纤维异形度的影响。
	2.	The simulation results show that the shaped degree is decreasing when the spinning temperature and intrinsic viscosity are increasing ; the spinning speed has little effect on the shaped degree when the pump mass throughput is constant ; the shaped degree is increasing with the increasing of pump mass throughput when the spinning speed is constant ; the cross air - blow conditions have much effect on the shaped degree ; the scope of shaped cegree is increasing when the aspect ratio of spinneret hole is increasing ; the shaped degree has obvious decreasing tendency in the small zone of spinning path and this decreasing became gently when the pump mass throughput is increasing 模拟的结果表明：扁平纤维的异形度随着纺丝温度及特性黏度的升高而降低；泵供量一定时，纺速对异形度的影响不大；纺丝速度一定，异形度随着泵供量的增大而增大；吹风条件对异形度的影响较大；随着喷丝孔的长宽比的增大，异形度增加的幅度也较大；异形度在纺程上较小的区间内有明显的下降趋势，并随着泵供量的增加其下降的趋势变缓。

Similar Words：

"形钉" Chinese translation, "形钉，肘钉 ②钉书钉" Chinese translation, "形顶尖" Chinese translation, "形定律" Chinese translation, "形动词" Chinese translation, "形短管" Chinese translation, "形断面型材" Chinese translation, "形队" Chinese translation, "形对接焊" Chinese translation, "形对接接头" Chinese translation