| 1. | The specimen deforms under a tensile stress applied parallel to the fibres .
试样在平行于纤维的张应力作用下发生变形。 |
| 2. | Critical tensile stress
临界抗张应力 |
| 3. | Study of in situ measurement of residual tensile stress in thin films for t - shaped microstructures
形结构在位测量薄膜中残余张应力的理论研究 |
| 4. | Three - dimensional finite element analysis on cell culture membrane under mechanical load
张应力作用下体外细胞培养膜上应力分布的三维有限元分析 |
| 5. | Morphological and biomechanical study on the tension - stress effect on the growth of epiphyseal cartilage
张应力对骺软骨生长的形态学和生物力学研究 |
| 6. | The change of microstructure of intramuscular connective tissue in response to the tension stress during limb lengthening
肢体延长中张应力对肌间结缔组织显微结构的影响 |
| 7. | Cbm sealed condition is bad under neutral plane at axial part where shows tensile stress in syncline structure
向斜中和面以下表现为拉张应力，向斜轴部中和面以下的煤层甲烷封存较差。 |
| 8. | Cbm is easy to escape over the neutral plane where shows tensile stress in antiform ; cbm accumulates under the neutral plane
背斜构造中和面以上表现为拉张应力，煤层气容易逸散，中和面以下煤层甲烷聚集。 |
| 9. | Residual stresses of bst thin films are tensile stresses , grain size and stresses increase with annealing temperature
Bst薄膜残余应力表现为张应力且随着薄膜晶化温度升高,薄膜的晶粒变大,残余应力呈变大的趋势。 |
| 10. | But there is a big tensile stress , caused by the difference of the thermal expansion coefficient , at the interface between the ha coating and the substrate
但因热膨胀系数差异， ha涂层与基体间存在很大的张应力。 |
