| 1. | A compound control strategy based on three - loop cascade control and improved pid algorithm is proposed in this regard
为此，提出了一种基于三环串级控制与改进的pid算法相结合的控制策略。 |
| 2. | In the fourth part , the chapter eight , a kind of expert cascade controller ( eec ) construction and its design method are proposed
摘要第四部分，即第八章，提出了一种专家式串级控制系统的结构及设计方法。 |
| 3. | The concept of networked cascade control system ( nccs ) is presented and a class of nccss based on fieldbus is studied
摘要提出了网络化串级控制系统的概念，并针对一类基于现场总线的网络化串级控制系统进行了研究。 |
| 4. | Finally , a cascade control example in industrial process control is analyzed to show the effectiveness of the presented modeling method
最后，通过工业过程控制中的一个串级控制实例分析，说明了该建模方法的有效性。 |
| 5. | The third section : used the feedforward - - cascade control strategy to control the temper temperature , and acquires a good result
三、利用工业界常用的前馈?串级控制方案，对钢丝回火温度进行控制，取得了较好效果。 |
| 6. | Because serial controllers and pid controller have n ' t good effect on this type system and the control parameters are difficult to be determined
比较当前工业上常用的串级控制和pid控制难以对此类系统奏效和控制参数难确定的缺点。 |
| 7. | Predictive control , which has developed in recent years , can control time - lag system efficiently . its trackability is better , but its immunity is not satisfied
本文在dmc pid串级控制的基础上，提出了一种改进方法，即引入神经元pid控制。 |
| 8. | 3 ) implement cascade control system to regulate wheel speed by dsp and motor driver instead of ordinarily single closed loop system
3 )改进了机器人轮速控制的单闭环控制系统，通过dsp和电机驱动芯片，实现机器人轮速的串级控制结构，改善了控制效果。 |
| 9. | ( 2 ) assistant signals each other dispel . according to three impulse control water lever error , designing three impulse pid cascade control system
根据三冲量水位调节系统控制水位误差,设计采用了三冲量pid串级控制方式,采用辅助信号蒸汽流量和给水流量对消方法消除水位偏差。 |
| 10. | For the long time - delayed characteristic of main - steam temperature object in power plant , a mainsteam temperature cascade control system with a feed - forward controller was proposed
摘要为了解决电厂主蒸汽温度系统的大迟延问题，提出了一种带神经网络前馈控制器的主蒸汽温度串级控制系统。 |
