预烧结 meaning in Chinese
presintering
Examples
- The sintering between tic powders can make the tic preforms with network structure
热压法集预制体成型和预烧结于一身,成功率高。 - Limnoa has been synthesized from self - synthesized material y - mn203 by wet moist chemical method under different sinter conditions in argon . the material was analyzed by xrd , sem . it is shown by xrd that material is limno2 single phase in 450 keeping 5h , then in 600 ? sintering 6h in argon
通过xrd物相分析发现:以自制原料y一mnzo3为锰源,在a :气保护下,采用湿化学法,在450下,预烧结5h研磨后再于600下烧结6h ,可以合成出单相limnoz 。 - Beryllium powders with the same particle size and various contents of beo were prepared by pre - sintering - acid washing processes initiatively and the influence of beo alone on o mys of beryllium was observed and some new results have been obtained - compared with the content of beo , the distribution of beo in beryllium has more critical influence on mys ; finely dispersed beo along the grain boundaries and in the matrix results in the dispersion strengthening of beryllium matrix and thereby the higher mys value ; on the contrary , the coarser beo particles clustering on the grain boundaries results in negative influence on o mys
开创性地用预烧结? ?酸洗工艺制备了相同粒度、不同beo含量的铍粉,从而开展了beo含量单独对铍材_ ( mys )影响的研究,得出一些新的结果:与beo含量相比, beo在铍中的分布状态对_ ( mys )的影响更大。沿晶界、晶内弥散分布的较细小beo对基体铍有弥散强化作用,使_ ( mys )即较高;如果beo较粗大地成簇状聚集在晶界,反而对_ ( mys )有不良的影响。