附加变形 meaning in Chinese
additional deformation
additional distortion
additive deformation
Examples
- The moistening deformation is a additional deformation of increasing water content after it is steady under the pressure
增湿变形是在压力作用下变形达到稳定后由于含水量增大而产生的附加变形。 - In chapter one , the raise of an ideology , studying about the deformation ' s rule attached to initial - stress configuration , the research history and actuality in domestic and overseas are narrated
本文第一章述评了初应力位形上附加变形规律研究工作这一思想的提出、研究历史及国内外研究现状。 - The second - order effects of column emphasize the connection between axis load and distortion add - ons internal force and add - ons distortion , second - order effects analysis should consider from whole
柱二阶效应问题研究的是柱轴力和变形的相互关系及其产生的附加内力和附加变形。对于二阶效应分析应该从整体上考虑。 - The conveyor belt is turned from flat belt into tubular one at transition section , with the result that great additional deformation and stress in both side of belt , decrease in the belt safety factor
摘要在圆管带式输送机过渡段，输送带由平形变成圆管，其边缘会产生较大的附加变形，产生附加应力，使输送带安全系数下降。 - Since the deformation of an engineering structure or component can usually be considered as the additional deformation superimposed on its initial stress configuration , this study is of great theoretical and engineering significance
由于工程结构或构件的变形总可以看作初应力位形上产生的附加变形。因此，上述问题及相应的解法具有重要的理论意义和工程应用价值，一批力学家为此发展了相应的理论。