通电时间 meaning in Chinese
resistance welding time
weld time
Examples
- Turn - on settling time is important for portable battery systems that conserve energy by powering the circuitry only for short periods of time
通电上升时间对要求通电时间短以保存电能的便携式系统尤为重要。 - Experimental results showed that the bond strength degraded as the charging current density and the polarization time increased basically
实验结果显示出基本上随著外加电流密度与通电时间的增加，介面握裹强度的折减就越明显。 - The results show that , when the compressor continuously runs , the stability of the test bed after using manual valve is better than that of using thermal valve , and it is little affected by the kinds of valves for adjusting cooling water ; and that , when the compressor intermittently runs , the operation stability would be obtained if pneumatic valve is used to adjust cooling water , especially at low speed
结果表明，压缩机连续运行时，制冷剂采用手动阀调节后工况的稳定性明显好于采用热力膨胀阀时的情况，此时调节冷却水量用的电动调节阀和气动调节阀对工况稳定性影响相差无几；间歇运行时，无论是热力膨胀阀还是手动阀，即便压缩机通电时间最长，仍达不到设定工况，特别是低速的断续尤为明显，而使用气动阀就能很好地解决这一问题。 - And takes the method of passing electricity in wet environment to carry on the reinforcement corrosion acceleration to the reinforced concrete , and uses the linear polarization method to carry on the test to the polarized resistance and corrosion current density of the steel bar flowed through by electricity at different time , analyzing the rule of the change of the reinforcement corrosion parameters , and test the chloride ion diffusion coefficient to evaluate the impermeability of the concrete
本文以不同水灰比、不同含气量、不同引气剂的钢筋混凝土为研究对象,采用湿通电法对钢筋混凝土进行加速锈蚀,同时采用线性极化法对不同通电时间的极化电阻和腐蚀电流密度进行测试,分析锈蚀参数的变化规律,并通过测定cl -扩散系数来评价其抗渗性。