退出运行 meaning in Chinese
in-service out of service
Examples
- Based on the change of electrical load , promptly monitor stop and run operation of capacitor to ensure effective watt factor on proper level
根据分路用电负荷的变化，及时检查电容器的投入和退出运行，保证有功功率因数维持在正常水平。 - The influences of components outage in the transmission corridor on the inter - area oscillations are further investigated , and some important conclusions are drawn
对南方电网西电东送通道部分元件退出运行时对低频振荡特性的影响进行了研究，得出了一些重要结论。 - Bf protection linking piece : the operator should set this linking piece on the “ on ” position under normal operation , then the bf protection is normally put into service ; as the linking piece is set on the “ off ” position , the bf protection is out of service
失灵保护压板：正常运行时压板应置于“投入”位置，失灵保护正常投入运行；压板置于“退出”时失灵保护功能退出运行。 - The low voltage impulse method , frequency response analysis method and short - circuit reactance method , which can be used to measure and diagnose the deformation of power transformer winding , are introduced in the paper
目前，监测变压器绕组变形的方法主要有低压脉冲分析法( lvi ) ，频率响应分析法( fra )和阻抗分析法。这些方法都需使变压器退出运行，在变压器离线情况下对变压器绕组变形进行测量的。 - Differential protection linking piece : the operator should set this linking piece on the “ on ” position under normal operation , then the differential protection is normally put into service ; as the linking piece is set on the “ off ” position , the differential protection is out of service
差动保护压板：正常运行时压板应置于“投入”位置，差动保护正常投入运行；压板置于“退出”时差动保护功能退出运行。