边槽 meaning in Chinese
edge slot
Examples
- It usually consists of c - section steel wall studs and gypsum wallboard . wallboard are intended primarily for architecture purposes , but they may also provide effective restraining action for wall stud
其墙体一般由墙体密立柱(一般为卷边槽钢) 、墙面围护材料(例如石膏板、定向板)组成。 - Sizes of specimens are the same as those in practical engineering project . the lipped channel section is used as wall studs and its space is 500 millimeter . the wall sheathings are screwed on cold - formed steel studs , with 12mm gypsum board on one side and 9 mm oriented strand board ( osb ) on another side
试件的立柱骨架为间距为500mm的c型卷边槽钢，两侧墙面板分别是12mm厚的石膏板和9mm厚的osb定向刨花板，墙面板与立柱骨架用自钻自攻螺钉连接。 - The dynamic characteristic of large - scale aqueduct is analyzed under four cases ( aqueduct without water , aqueduct with water in three troughs , aqueduct with water in the middle trough , aqueduct with water in side troughs ) , and the results can be applied to seismic - resistance design of large - sc ale aqueduct . the earthquake time history response of large - scale aqueduct is studied under four cases when the el - centro earthquake wave is inputted . in the paper , base isolation technology is applied to avoid the destroy arising from the bigger stress in aqueduct
本文分4种工况(槽内无水、中槽过水、边槽过水和三槽都过水)对该大型渡槽结构的动态特性进行分析，所得结果可为大型渡槽结构抗震设计提供依据；并在el - centro地震波激振下进行渡槽结构在这四种工况下的地震动力时程分析，计算给出了大型渡槽结构的地震反应规律；为了避免较大应力的出现对渡槽结构造成破坏，本文采取隔震措施来减小该结构的动力反应，并分析其隔震效果，提供设计参数，为工程设计提供依据。