输弹 meaning in Chinese
missile feeding
Examples
- The seventh , dynamic analyses on the gun , the gun ' s ramming system , and the overall gun coupled with it ' s ramming system are simulated
分析了在耦合运动情况下供输弹系统的动态响应以及供输弹动作对全炮动态响应的影响。 - The fourth , the models of the drivers are set up by electromotor drive and fluid drive theory , from which the programs are compiled for adams to call in as the input parameters
运用电机拖动、液压控制的一般理论建立了某炮供输弹系统驱动环节的数学模型并编制了相应计算程序，通过adams的数据接口调用这些程序以作为动力参数输入。 - This paper focuses on launch dynamics of a self - propelled gun coupled with its automatic ramming system , based on the rigid multi - bodies theory . the main contents are included as follows : the first , three - dimensional models of the whole gun and it ' s ramming system are constructed by use of the software platforms of i - deas and adams ( automatic dynamic analysis of mechanical system ) . the second , the dynamic equations are obtained according to the lagrange equations of the first kind expressed by euler angles
本文运用多刚体动力学理论，对某炮自动供输弹系统和全炮耦合运动的发射动力学问题进行了探索研究，主要包括以下几个方面：基于i - deas平台和动力学分析软件adams ( automaticdynamicanalysisofmechanicalsystem )建立了某自行火炮的全炮及其供输弹系统的三维实体模型；推导了第一类lagrange形式的多体动力学方程的显式表达式，建立了相对惯性系运动的全炮动力学模型、供弹系统动力学模型以及供输弹系统与全炮耦合运动的动力学模型。 - Consulting about foreign study , the research showed that the speed of firing can be improved by modifying the machanism of the automatic , and at the same time two problems must be solved , one is that more mechanisms should act at the same time to reduce the time of the whole actions of automatic mechanisms , the other is that the time of each mechanism ' s action should be reduced . the time can be reduced by several ways . the first one is to reduce the mass of mechanism , the second one is to increase the force applied on the mechanism and reduce the resistance , the third one is to shorten the working distance , the fourth one is to give abstention and cushion to mechanism before action ends . this thesis includes the following topics : discussion of the theory of the automatic and shell - swing design , establish the kinematic and dynamic models of the main structures in automatic and perform the corresponding mechanical analysis , set up a compendious cyclical diagram for the automatic ; the computer simulation to the navy gun ' s firing parts
由现有舰炮自动机循环图可知，制约射速提高的几个因素是：后座、复进占用的时间较长，约占总循环时间的三分之一；供弹机的动作单独占用循环时间，且较长；输弹机的输弹时间较长；各机构动作重叠少；参考国内外的研究情况，本文提出了在采用改进完善现有自动机机构来提高射速时，必须考虑以下两点： ( 1 ) 、力求在同一时间内能使更多的机构参与工作，并处理好各动作之间的衔接(即接口技术) ，以便缩短整个自动机的动作循环时间。