超塑成形 meaning in Chinese
superplastic forming
Examples
- Study on thickness distribution in a superplastically formed bellows made of titanium alloy
超塑成形的钛合金波纹管壁厚分布规律研究 - The results showed that the partial liquid phase was one of the main reasons for the premature fracture of the material during high temperature tension over 518
结果表明：局部液相是导致该复合材料在518以上高温拉伸试样过早断裂的主要原因之一，为该材料超塑成形工艺参数的确定提供了参考依据。 - In this study , advanced laser surface treatment , superplastic , solid - joint technologies were used to the bond of a - tial alloy to realize the high quality bond of this alloy at low temperature and short time
本文将先进的激光表面处理，超塑成形，扩散连接工艺结合在一起，实现- tial合金低温、短时、高质量的固态连接。 - In this paper , 130mm diameter hot - rolled bars ( 3 transus temperature is 798 c ) were used in experiments . the superplastic property of ti - 1023 alloy was studied systematically by the experiments of tensile and compression . the preparation method of fine - crystalline structure and the processing parameters of superplastic forging are optimized
本文以130mm热轧棒材为原材料，通过超塑性拉伸和超塑性压缩试验，对ti - 1023合金的超塑性进行系统研究，研究坯料细晶组织制备方法，优化超塑成形工艺参数，为高筋薄腹板复杂形状ti - 1023合金锻件超塑性等温模锻工艺的制定提供试验依据。