×

起重机桥 meaning in Chinese

crane bridge

Examples

  1. System of overhead traveling crane parametric design
    桥式起重机桥架的参数化设计
  2. It is demanding to fabricate crane bridge as large welded structure , so the upgrade to change its span is very challenging
    摘要起重机桥架作为大型焊接结构件,制造要求高,其改制具有典型意义。
  3. Multi - national group of companies , active in the design , development and manufacture of melting , thermal processing and production systems for the metals and materials industries
    -上市公司,专业生产桥式和门式起重机桥式起重机铸造起重机门式起重机。
  4. The design method of main mechanisms of the crane , which includes the winch section , rotary bearing , and the extension section , is described . the layout of directing ( triangle ) tri - joint mechanism , which affects the performance of crane greatly , is optimized . at the same time , the load of axles , the rated load capacity which depends on the tipping stability of the crane and the maximal support force of the out - triggers are calculated by the vb programs
    本文对于qy25型汽车起重机的设计进行了研究,就汽车起重机主要机构如起升机构、回转机构、伸缩机构的型式及计算方法做出了论述,对影响起重机性能的三铰点布置进行了优化,用vb语言对计算繁琐的起重机桥荷、稳定性决定起重量、最大支腿反力的计算进行了程序编制,对确定中、小型汽车起重机设计方案,具有很强的现实意义。
  5. The ansys , a kind of fea program , was used to build model of small carriage . the procedure of gantry beam bump with secondary beam of bridge was reappeared by running nonlinear calculation and loading program which was written by apdl program language . the closest deforming result was gotten , and the deforming of main beam , secondary beam and end beam and inner stress distribution status were calculated
    采用大型三维有限元软件ansys对该起重机以及小车架等进行了建模、应用apdl语言编写加载程序、进行非线性计算,再现龙门横梁与起重机副梁碰撞过程,最后得到与实际变形结果最接近的一种状态,得出起重机桥架主梁、副梁、端梁的变形以及其内部的应力分布情况。

Related Words

  1. 钻井起重机
  2. 火车起重机
  3. 铁条起重机
  4. 起重机活塞
  5. 流动起重机
  6. 起重机小车
  7. 拖拉起重机
  8. 安全起重机
  9. 甲板起重机
  10. 安装起重机
  11. 起重机起重能力
  12. 起重机器厂
  13. 起重机桥架
  14. 起重机全幅
PC Version

Copyright © 2018 WordTech Co.