调节手柄 meaning in Chinese

adjusting handle
regulating handle

The regulating handle is fitted with a fine speed adjust knob and a latch
调节手柄配有一个细的速度调整旋扭一个锁销。
The regulating handle consists of manoeuvring valve pos . no . 01 and handle mechanism
调节手柄由操纵阀01和手柄机构组成。
Because the output pressure signal of the manoeuvring valve ( pos . no . 01 - ) corresponding to the regulating handle position determines the output rate of the p . g . governor through the 3 - way valve ( pos . no . 29 , lower frame )
因为操纵阀01 -相应调节手柄位置的输出压力信号决定调速器输出比率通过三通阀29 ，下位。
After completion of the starting operation , engineer can drive the main engine at the speed as he desires by moving the regulating handle in the range between the min . fuel position and the max . fuel position
在启动操作完成后，轮机员可以驱动主机到他想要的转速通过移动调节手柄在最小燃油位置和最大燃油位置之间范围内。
After the normal air - running , engineer must move the regulating handle to the position corresponding to the pressure which has been set by the pressure reducing valve ( pos . no . 28 ) when the speed of the main engine is more than the air cut speed
在正常的空气运转后，轮机员必须移动调节手柄到相应的压力的位置，其压力已由压力减压阀28设定，当主机的转速已经高于空气切断转速。