调制电压 meaning in Chinese
modulating voltage
modulation voltage
Examples
- This structure has the advantage of shortness , low voltage and less electrode number
该结构具有调制电压低、所需电极组数少和器件长度较短的特点。 - Modulating the voltages at the same frequency as the jet guarantees that the correct level of charge is present on the drops
通过用与墨滴同样的频率施加调制电压，可以保证正确的电荷数被正确加载在墨滴上。 - All the films were found exhibiting strong ( 001 ) and ( 002 ) plane reflection of xrd analysis , and the film with the k + / nb5 + molar ration of 2 / 3 ( k2 / 3sbn60 afterwards ) showed the strongest intensity of ( 001 ) plane reflection . the film surface was uniform and smooth
同时，测量mgo衬底上的sbn薄膜和掺k的sbn薄膜的几l系数分别为37 . 6pm / f和58 . 5pm / v ，掺k的sbn60薄膜制成的波导，其半波调制电压明显要比不掺k的波导半波调制电压低。 - Lithium niobate is a kind of ordinarily material for guide - wave devices , it can realize low modulation voltage , fast switch velocity , low material costs , simple fabrication process and it is a mature technology . at present , lithium niobate is applied in fast optical network and optical signal processing systems
Linbo _ 3是由来已久的波导类器件的材料， linbo _ 3材料能实现较高的调制速度和较低的调制电压，材料成本低，工艺相对简单，是较成熟的技术，目前在高速光网络和光信号处理网络已经有着重要的应用。 - The tests of e - o applications by our flux ktp has been realized , the results showed : optical waveguides fabricated by using an ion - exchange process , which have an exchange - ion concentration depth profile and refractive - index profile , is close to a complementary error - function distribution , optical homogeneity and device thermal stability is much better . amplitude modulation switch formed by our flux ktp has the contrast ratio of 150 : 1 and insert loss is 2 . 5 % at 1064 nm . high quality optical pulse with 1 ns width was cut successfully by using an e - o modulator from a laser pulse with 50 ns width , this modulator had run for three years , and the crystal did n ' t blackened , it showed our low conductivity flux ktp can endure high modulation voltage for a very long time
Ktp晶体的电光应用试验表明：用离子交换法制作的电光波导，其离子交换浓度、折射率变化符合余弦误差函数，光学均匀性以及器件的温度稳定性较好；制作的强度调制电光开关，消光比为150 ： 1 ，对1064nm激光的插入损耗为2 . 5 ；制作的电光调制器用于激光脉冲整形试验，从脉冲宽度50ns的激光脉冲削出脉宽1ns的高质量光脉冲，该电光开关经过长达三年多的使用，没有出现晶体变黑现象，说明本实验的低电导率ktp晶体能够耐受长时间的调制电压。