×

试样长度 meaning in Chinese

specimen length

Examples

  1. Standard practice for length change of cast , drilled , or sawed specimens of hydraulic - cement mortar and concrete
    水硬水泥灰浆及混凝土的铸造钻孔或锯断试样长度变化的标准实施规程
  2. It adopts pc computer control , the high accuracy force value sensing test system , step - motor direct driving ball threaded screw methods it may set arbitrary numbers for the parameters such as gripped sample length stress rate , test times etc . the testing results would be output in forms of chinese characters reporting statistics through the printer
    采用pc机控制,高精度力值传感测量系统及步进电机直接驱动滚珠丝杆方式.对夹持试样长度.拉伸速度.实验次数等参数均能任意设定.测试结果由打印机输出
  3. It adopts pc computer control , the high accuracy force # 118alue sensing test system , step - motor direct driving ball threaded screw methods it may set arbitrary numbers for the parameters such as gripped sample length stress rate , test times etc . the testing results would be output in forms of chinese characters reporting statistics through the printer
    采用pc机控制,高精度力值传感测量系统及步进电机直接驱动滚珠丝杆方式.对夹持试样长度.拉伸速度.实验次数等参数均能任意设定.测试结果由打印机输出
  4. It has been put forward that quality index of geotgrids should be the tensile strength , strain , and strain rate , and the sizes of geogrid " s sample for strain test are suggested ; the tensile strength of geogrid increases with increase of width of test sample , while the strain rate decreases as the pullout rate , length of sample increases , and when the pullout speed is larger , the strain rate varies with the width and length of sample , otherwise , the strain rate has little to do with them . . 2
    提出了将抗拉强度、延伸率和延伸速率作为土工格栅的质量控制指标,并将士工格栅延伸速率纳入某些工程设计参数;建议土工格栅的延伸率测试试样宽度至少3根,长度至少3节;并发现土工格栅抗拉强度随宽度增加而递增,土工格栅延伸率随拉伸速率、试样长度增加而减小,当拉伸速率较大时,延伸速率与试样长度、宽度均有关;反之则基本无关。

Related Words

  1. 腐蚀试样
  2. 试样估计
  3. 抗拉强度试样
  4. 浴池试样
  5. 试样环
  6. 标准试样
  7. 试样处理
  8. 代表性试样
  9. 试样点
  10. 湿试样
  11. 试样标准偏差值
  12. 试样材料
  13. 试样尺寸
  14. 试样冲床
PC Version

Copyright © 2018 WordTech Co.