补偿量 meaning in Chinese
compensation dosage
complexity
Examples
- The realization for rapid auto input of tools compensation to machine center
加工中心刀具补偿量自动输入的快速实现 - Those who wish to trim or eliminate their emissions , but find it too expensive or difficult to do so , can thus buy the appropriate amount of offsets instead
意图削减或消除排放但认为所费过多的人可以购买适当的补偿量作为替代。 - An universal equation , which can be directly used to compute the compensation resulted by the surface roughness , was deduced according to the flat - bottomed echo formula
根据大平底回波声压公式推导出了工件表面粗糙度和补偿量之间的关系，可直接通过计算得到表面粗糙度引起的衰减量。 - The software can realize diagram paper design of over ten thousand kinds of specification of u - type expansion joints and the design range is dn25 - 1000mm , low pressure and middle pressure , with compensating value smaller than the 300mm
整个软件可完成u型、加强u型和型各种规格波纹管的设计；通径25 - 1000mm 、中低压下、补偿量小于300mm的u型膨胀节上万种产品的图纸设计。 - According to the measured values of the joint angles and the end - effector positions , jacobian matrix is calculated , and errors between the desired and the measured positions of the end - effector are exported to the least square method to determine the compensation for the dimensional parameters of the robot
通过机器人关节角和末端手爪位置的测量数据，计算雅可比矩阵以及手爪位置理论值和实测值的误差，采用最小二乘法对机器人的尺寸参数进行补偿量的计算。