衍射强度 meaning in Chinese
diffracted intensity
diffraction intensity
intensity of diffraction
Examples
- When ba / sa = 3 / 1 - 9 / 1 , longer domains ( ba ) are in majority , and some hydrophobic " holes " ( caused by the difference in height between ba and sa ) formed in the alkyl layer which can be used to fabricate special functional nanostructures
衍射强度出现“ w ”形状变化，表明在中间比例所形成的长短链交错的结构向两边变化时，都要经历混合膜有序度降低的过程。这为制备复合膜时比例的选取，提供了有意义的数据。 - When the time of heat preservation prolonged , the intensity of most orientation of perovskite phase became stronger , and the full width at half maximum ( fwhm ) decreased . when the time of heat preservation was 80 seconds , the intensity of ( 100 ) and ( 110 ) orientation began to decrease
循环次数从1次增加到3次, plt薄膜的( 100 )和( 200 )峰的衍射强度逐渐增强,薄膜的结晶性提高,铁电性能逐渐增强,循环4次溅射后,薄膜的结晶性和铁电性开始下降。 - Under the same beam parameters , the intensity gradient near the mirror surface of the blue - detune sfgb is the nearly same as that of the sgb , but the intensity distribution of the fgb is a constant within a larger radial range , the width of the sfgb mirror will far greater than one of the sgb mirror
类似地，半束兰失谐平顶高斯光束反射镜和sgb反射镜相比在yoz平面上的衍射强度梯度是近似相同的，也就是说在入射光束参数相同的条件下，在上述二种反射镜表面附近入射原子受到的光偶极排斥力大小是近似相同的。