荷载的传递 meaning in Chinese
load propagation
Examples
- This paper compares the spatial calculation of piled wharf with simplified plane bent structures ' calculation through selected models , and analyzes the effect on the simplified transverse beam at different location of the crane , so as to obtain the distribution rule and empiric coefficient of crane load
摘要通过所选模型进行高桩码头结构空间计算与简化的平面排架计算对比，分析门机不同位置时传递到所简化横梁的作用效应，从而得出门机荷载的传递分配规律及传递的经验系数。 - According to test results of two specimens of local transfer rc joint from inclined column to beeline - shaped wall under vertical static loads and results of corresponding finite element analysis ( ansys ) , fundamental behaviors of the joint are achieved , which include paths of vertical load transfer before and after cracking , stress distributions , occurrence and development of cracks and final failure mode of the joint
本文通过两个钢筋混凝土斜柱?一字形薄壁柱局部转换节点在竖向荷载作用下的静力试验以及有限元分析，获得了该节点的基本性能，其中包括开裂前后的竖向荷载的传递路径、试件应力分布，裂缝的发生、发展，及试件最后的破坏形态等。 - Problems occured in the anchoring of overhung tourist hall on top of the tv tower and tower drum due to construction mistakes . it was introduced in this paper that two non - binding prestressed girder beams are respectively set in corresponding locations as the anchor beam of overhung radial support beam of tourist hall , thus the integrity of the tower drum and transmission of the load were guaranteed
由于施工失误,作为电视塔顶的外悬游览厅和塔筒间的锚固发生了问题,本文介绍了采用在相应位置设置两根无粘结预应力大梁分别作为游览厅屋面和楼面径向悬挑支承梁的锚固梁,确保了它和塔筒的整体性和荷载的传递。