腐蚀电流 meaning in Chinese
corrosion current
Examples
- Effects of diamond particles and their adding contents on the coating hardness , friction coefficient , wear resistance , corrosion current density and microstructures were studied
研究了金刚石粒子及其添加量对涂层硬度、摩擦因数、耐磨性能、腐蚀电流密度和微观组织的影响。 - Poles - etching method is that the etching current caused by the external voltage is used to promote the intermediate ion product break away from the surface of substrate and keep the etching rate stable
电极腐蚀法是指在激光腐蚀的过程中,通过外加电压在溶液中形成腐蚀电流,促使中间离子产物脱离基片表面,使腐蚀持续稳定进行。 - Though membrane time arises to the antiseptic efficiency by way of reducing and corroding the density of the electric current and increasing the resistance of polarising to corroding the influence of the electric potential by oneself not big in advance
虽然预膜时间对自腐蚀电位的影响不大，但通过降低腐蚀电流密度和增大极化电阻的方式也起到了防腐功效。 - Scan speed ’ s affection for cable corrosion speed is studied , it is founded that the rapider the scanning rate , the bigger the measured corrosion current density , that is the quicker the corrosion rate , 8mv / s is the best scan speed . 2
研究了扫描速度对钢绞线腐蚀速度的影响;提出了扫描速度越大,钢绞线腐蚀电流密度也越大,腐蚀速度越快,其中8mv / s为最佳扫描速度。 - The corrosion potential was the biggest and the corrosion current was the smallest one when the concentration of super - 3900 was 0 . 5 % ; the corrosion potential was increased with the addition of mps - dl , but the smallest corrosion current is under 0 . 01 % mps - dl . the rust time was the longest one when the concentration of super - 3900 was 0 . 5 % as well as mps - dl was 0 . 01 % . it was increased as a peak curve with al2o3 concentration in plating solution and ph value increased gradually with cathodic current density ; the corrosion weight
通过测量tafel曲线可知,在super - 3900浓度为0 . 5 % (相对于镀液的体积百分含量)时获得的镀层腐蚀电位最正,腐蚀电流密度最小;随着镀液中mps - dl含量的增加,获得的镀层的腐蚀电位逐渐正移,在浓度为0 . 01 % (相对于镀液的体积百分含量)时腐蚀电流密度最小。