胶合强度 meaning in Chinese
bond strength
Examples
- Plywood - determination of glue bond strength
胶合强度的测定 - The tea waste powder with different sizes as an additive was used to urea - formaldehyde ( uf ) resin , and the effects of the tea waste powder sizes and amount on the free formaldehyde content of uf resin , the formaldehyde emission , and hood strength of uf resin hooded plywood were studied in this paper
摘要将不同颗粒度的茶叶废料粉添加到脲醛树脂胶中，研究了茶叶废料的颗粒度、加入量等对脲醛树脂胶黏剂的游离甲醛含量、黏接胶合板的甲醛释放量及胶合强度的影响。 - The experimental results indicated that the tea waste powder as an additive to uf resin could reduce its free formaldehyde content and reduce the formaldehyde emission of uf resin bonded plywood ; the tea waste powder with much less size was easily mixed with uf resin and acted much more effective ; the tea waste as an additive to uf resin in a proper amount did nut decrease the bond strength of plywood
实验结果表明，茶叶废料作为填料添加到脲醛树脂胶黏剂中，能够降低其游离甲醛含量以及其黏接胶合板的甲醛释放量；茶叶废料颗粒度越小，与脲醛树脂混合性越好，消除甲醛效果越显著；茶叶废料的适量加入不会降低胶合板胶合强度。 - This paper mainly discussed the optimization design of two - stage star - type gear transmission system . it covered the two sides : one - stage gear transmission and two - stage gear transmission . on the basis of their analysis and research , the mathematic models are created which include the objective functions of minimum volume and minimum center distance , the constraints of contact strength , bend strength and scuffing strength
本文主要研究了航空发动机星型齿轮传动系统的优化设计，对单级齿轮传动和两级星型传动都进行了深入的分析和探讨，分别以系统体积最小和中心距最小为目标函数，以齿轮的接触强度、弯曲强度、胶合强度等为约束条件，建立了完整的数学模型。