耐热温度 meaning in Chinese
heat-resistance temperature
Examples
- Ebonite - determination of martin heat resistance temperature
硬质橡胶马丁耐热温度的测定 - Their properties have been investigated by using scanning electronic microscopy ( sem ) , differential scanning calorimetry ( dsc ) , x - ray diffraction ( xrd ) , thermogravimetry - differential thermal analysis ( tg - dta ) , infrared spectroscopic analysis ( ir ) , and gas chromatography ( gc ) , etc . the effects of the mulser ' s stirring rate and the emulsifier concentration on the properties of encapsulated pcms have been systematically studied , and nanopcms have been obtained by increasing the stirring rate or the emulsifier concentration . the influences of different nucleating agents on micropcm performances have also been investigated in detail to search for a suitable nucleating agent to prevent micropcms from super - cooling
首先，系统研究了乳化机转速和乳化剂浓度对胶囊性能的影响，并通过提高转速或乳化剂浓度获得相变材料纳胶囊；其次，系统研究了不同成核剂对微胶囊性能的影响，找到合适的成核剂抑制了相变材料微胶囊的过冷现象；再次，详细研究了环己烷对胶囊性能的影响，并通过添加适量环己烷提高了相变材料微胶囊及纳胶囊的耐热温度。 - Based on the characteristics of silicon whisker , the research on the modification of pa6 by silicon whisker sio2 - jx was made , and the result showed that the tensile strength , impact strength , brinell hardness , and heat resistance increased with the increase of the content of the whisker ; sio2 - jx could replace short glass fiber in the modification of pa6 , improving the heat distortion temperature , removing the appearance of glass fiber , reducing shrinkage and the cost
摘要利用晶须矽纤维状的特性，对其填充于龙玻纤改性进行研究，结果表明，随晶须用量的增加，材料的拉伸强度、冲击强度，布氏硬度、耐热温度均得到提高；晶须矽可取代短玻纤使用，提高热变形温度、消除玻纤外露，降低收缩率及生产成本等。