耐冲蚀 meaning in Chinese
erosion resistance
Examples
- The wear mechanisms were explored . the results reveal that the erosion resistance of the coatings is obviously superior to a3 steel
研究发现：熔覆层的耐冲蚀性能较a _ 3钢有显著提高。 - The results are listed as following : the anti - erosion proportion of a3 steel and 1cr18ni9ti stainless steel is not good
发现： a _ 3钢和1cr18ni9ti不锈钢的耐冲蚀性能相似，都不太耐磨。 - High chromium cast iron has higher erosion resistance at lower impact angle , while the erosion resistance is worse for the lower toughness at normal impact
高铬铸铁在低角冲蚀时有较高的耐冲蚀性，但高角冲蚀时由于脆性大，易崩裂。 - The erosive wear behaviors of five engineering materials , include a3 steel , 1crl8ni9ti stainless steel , high chromium cast iron , ptfe and corundum , were studied by an air blast tester under ambient
采用气流喷砂型实验装置测试了a _ 3钢、 1cr18ni9ti不锈钢、高铬铸铁、聚四氟乙烯和刚玉五种工程材料的耐冲蚀性能。 - The mechanism of corrosion and erosion resistance of nicr alloy and cermet coatings were explored and their performance were compared with 20g , 20g covered by dope and the coatings of fecral , nicrti used widely at present
并将由这些新的涂层材料和目前广泛使用的fecral ， nicrti以及与未加以保护的20g基体和刷涂料保护的20g在抗高温氧化、高温腐蚀、耐冲蚀磨损和热震性等方面加以比较。