线路电流 meaning in Chinese
line current
Examples
- In the term of restoration reconfiguration , it is necessary to assure that all lines current and nodes voltage are in the limits of safety
故障恢复过程中保证所有的线路电流或节点电压在安全范围限度内。 - An optimization model of distribution network reconfiguration is established , in which the minimum network loss is taken as objective function , the restrictions to the decline of voltage and current are taken as constraint conditions
以网损最小为目标函数，以配电网电压降的限制、线路电流量的限制等为约束条件，建立了配电网络重构优化模型。 - They are conflict . in order to resolve the problem , this thesis putforward a new scheme of power supply by special ct with compensate function . analyzed the principle , and designed the structure . in order to reduce the start - upcurrent , there are some devices optimize for the circuit
为了协调两者的矛盾,本文提出了一种带有补偿功能的特制小ct供能方案,对其基本结构和工作原理进行了分析,针对线路处于小电流工况,设计中采用多种优化以尽量降低电源的启动线路电流。 - Using the high - performance digital signal processor ( dsp ) as cpu , the author designs the medium - speed sampling and processing unit of the fault locator . on the one hand , this unit can sample voltages and currents of the line synchronously ; on the other hand , this unit can start the fault locator up and select the fault lines when faults occur
本文作者还以高性能的数字信号处理器（ dsp ）为cpu设计了测距装置的中速采样处理单元，该处理单元一方面可以实现线路电流电压信号的同步数据采集，另一方面可以完成测距装置的故障启动和故障选线任务。 - Then the high potential circuit power supply of ect is reasearched , designed a scheme of power supply by laser , introduced the key part , and reasearchedthe circuit of protecting . the emphases of researchis the scheme of power supply by aspecial ct , but this scheme have two difficult , in the condition of low current inline , the device must work normally
然后对有源型ect的供能电路进行了研究,设计了激光供能的整体方案,对其中关键器件和保护电路进行了介绍和研究。本文重点研究了小ct供能这一在线供能方式,此方式有两个难点,其一:当线路电流处于小电流状态时,要保证电源的供应。