粘结应力 meaning in Chinese
bond stress
Examples
- Finite element of dynamical bond stress of insert rebar under explosive loads
爆炸荷载作用下植筋粘结应力有限元分析 - So , the bond stress and slip of src eccentric loading columns must be accurately measured and studied further
因此有必要通过准确量测构件内部的粘结应力和滑移，进一步对偏压柱的粘结滑移性能进行研究。 - It is indicated in the test that the influence of loading to strain in the grout was about in the range of 5 ~ 6m , and very weak beyond 4m . the distributions of strain and bond stress in the grout are attenuated in the minus exponential rule
试验结果表明，加载对锚固段内的应变影响范围大致在5 6m左右， 4m以外很微弱；锚固段注浆体内的应变与粘结应力分布按照负指数规律衰减。 - In the end , according to achievements from home and foreign countries in related research and those gained in the on - site test , two design methods for compression dispersion - type anchor are provided in this paper , the first one is experiential des
最后，综合国内外的相关研究成果以及现场试验成果和理论计算结果，提出了压力分散型锚索的经验设计方法和基于峰值粘结应力的设计计算方法。 - ( 2 ) from the equilibrium conditions of the isolated segment from a beam - column sub - assemblage , it is clarified for the first time that the bond stress along the beam rebars passing through the joint transfers into the column end to balance shear at this column end at the same ratio as that of the compression force in the compressed concrete at beam ends
通过对梁柱组合体柱脱离体的平衡条件，首次明确了贯穿节点梁筋粘结应力和梁端受压混凝土的压力以相同的比例传入柱端以平衡柱端剪力，从而对节点区的传力机理重庆大学博士学位论文结出了完整的和具有说服力的解释。