×

稳态信号 meaning in Chinese

steady state signal
steady-state type of signal

Examples

  1. The discrete fourier transform algorithm can analyze time - domain ' s stationary disturbance signal effectively and confirm the signal ' s distributing in the frequency domain
    而离散傅立叶变换则可有效地对稳态扰动进行分析,得出时域稳态信号在频域中的分布情况。
  2. The wavelet ' s characteristic of focus " varieties make wavelet better analyses ability in the time field and the frequency field . it is a perfect method of analyzing non - steady signal , and it is fit to analysis ultrasonic pulse echo signal
    而小波的“变焦距”特性使得小波分析在时域和频域中都具有良好的分析能力,是一种理想的分析非稳态信号的途径,适于对超声脉冲回波信号的分析。
  3. Based on the different work states of engine , the engine vibration signal collected in it ' s steady work conditions is analysed by the technique of confrequency spectrum ; the signal related to the fast run - up state is processed by stft and wavelet analysis
    根据发动机的工作特点,将振动信号分为稳态振动信号和过渡态振动信号。稳态信号采用传统的傅立叶分析方法,过渡态信号采用了短时傅立叶变换和小波方法。
  4. Based on the analysis of stable and transient waveforms in the power system , the paper use the exponent - typed signal to describe the signals in the power system including the dc element , fundamental , harmonics , interharmonics , subharmonics and the attenuation of the dc element and the sine waveform
    根据对电力系统暂、稳态信号波形的分析,本文用指数型信号来描述电力系统信号(包括直流分量、基波、谐波、间谐波、次谐波以及衰减直流分量、衰减正弦波等) 。
  5. This paper researches the non - direct - grounded system fault detection from software arithmetic view , whose main content is as follows : the paper analyses the system running characters before and after fault . and the paper analyses the fault transient signal and fault steady signal and all parts in fault steady signal after the single line - to - earth fault occurs , and discovers the fault laws and appearance of fault signal . the analyzing of the fault laws and fault phenomenon of non - direct - grounded system all above is the base of analyzing arithmetic
    本文针对小电流接地系统选线的问题,从软件算法的角度进行了研究,主要内容如下:对小电流接地系统故障前和故障后系统的运行特点进行了分析,并且对小电流接地系统发生单相接地故障后,故障暂态信号、故障稳态信号以及故障稳态信号的各种成分进行了深入的分析,找到了故障的规律以及其故障信号的表现形式,为对各种算法的分析比较打下了基础。
More:   Next

Related Words

  1. 稳态频率
  2. 稳态过程
  3. 稳态滞后
  4. 稳态振动
  5. 稳态电抗
  6. 稳态负载
  7. 三稳态
  8. 稳态系统
  9. 稳态热流
  10. 稳态说
  11. 稳态相位误差
  12. 稳态响应
  13. 稳态性分泌
  14. 稳态性能
PC Version

Copyright © 2018 WordTech Co.