硫化温度 meaning in Chinese
cure temperature
curing temperature
Examples
- Higher sulfidation temperatures can results in coarser fes2 grains , higher electrical resistivity and higher possibility to produce p - type thin films
硫化温度越高， fes2晶粒尺寸越大，薄膜电阻率越高，并趋于p型导电。 - In theory , the sns thin films can also be prepared in the sulphurisation temperature being 280 ~ 290 and the sulphurisation time being 20 ~ 40 minutes
在理论上,硫化温度为280 ~ 290硫化时间为20 ~ 40分钟时也能制备sns薄膜。 - Expatiation is on made the mechanism of rubber foaming process , and the effect of types of foaming agent , dosage of foaming agent temperature of sulfuration on rubber foaming process
摘要通过试验，探讨了橡胶的发泡机理及发泡剂种类、发泡剂用量、硫化温度对橡胶发泡的影响。 - The results indicate that the reaction temperature to form fes _ 2 fully is 400 ? . higher temperature than 400 ? makes an insignificant acceleration to the conversion from fe to fes2
研究结果表明，硫化温度为400时能充分形成fes _ 2 ，高于400后，硫化温度的升高对fes _ 2的形成没有明显的促进作用。 - The effects of the sulfidation parameters on the microstructure and photoelectrical characteristics of fes _ 2 thin films have been investigated by the sulfidation annealing for the fe films under different temperature , time and pressure
本文采用不同的硫化温度、时间和压力对相同厚度的fe膜进行硫化处理来研究硫化参数对薄膜组织和光电性能的影响。