熔渗 meaning in Chinese
infiltration
Examples
- Simulation and analysis of model filling of resin film infusion process
树脂膜熔渗工艺充模过程的模拟与分析 - Low voltage plasma discharged alloying ceramic coatings in liquid medium
低电压等离子体放电熔渗陶瓷涂层的研究 - 3 . the uneven distortion of contact finger is due to the uneven distribution of cr along circle of the contact during infiltration
( 3 )触指不均匀变形是由于在熔渗过程中cr元素偏析上浮，在圆周方向分布不均而致。 - W - cu composites are usually fabricated by infiltration - sintering porous tungsten compacts with molten copper or by liquid - phase sintering w - cu powder compacts
W - cu复合材料通常采用粉末冶金熔渗烧结或液相烧结法制取。 - It is reverse for the composites having low cr content . 3 . hardness of the composites decreased and electrical conductivity increased with decrease of cr content while infiltration temperature is same
在同一温度进行熔渗时，随着cr含量的降低，材料的硬度降低，电导率升高：加入fe后材料的硬度显著升高，电导率则降低。