热退火 meaning in Chinese
thermal annealing
Examples
- It was reported that the secondary phase of mnas has been found in gaas substrate by mn - implanted and subsequent rapid thermal annealing
有报道称采用离子注入的方法将mn ~ +注入到gaas单晶衬底中，经过快速热退火处理后，发现在晶体中生成了mnas第二相。 - Thin - film area : the area to deposit " dielectric layer " and " metal layer " as the conducted or insulated films , also has cmp ( chemical - mechanical _ polish ) to planarize the chips on the wafer ' s surface and add high ( low ) temprature rtp ( rapid - thermal - process ) to the wafer
薄膜区：专门沉积“介电层” ， “金属层”等导电或不导电薄膜的区域，并兼做晶圆表面器件之平坦化及高（低）温快速热退火制程。 - The development of solar cells is showing a tendency to improve efficiency and reduce cost . crystal silicon solar cells are considered the most promising cells in the future for their advantages , such as high efficiency , great stability , simple processing , and none - pollution
主要工作包括三个部分：首先研究了不同温度的热退火对于硅片氧碳含量和少子寿命的影响，然后将热处理过程应用于常规太阳电池的制备工艺，制出太阳电池。 - In this paper , we implanted mn + ion of different dose into undoped semi - insulating ( 100 ) gaas substrate then performed rapid thermal annealing in different temperature and time . studied the different annealing condition dependence of the samples " structure , electrical and magnetic properties and the relation of the mn + forms and these properties
本课题采用离子注入的方法将不同剂量的mn ~ +注入到非掺杂半绝缘( 100 ) gaas单晶衬底中，然后进行不同温度和时间的快速热退火处理，研究了不同的退火条件对样品注入层的晶体结构、电特性和磁特性的影响以及mn ~ +在样品中的存在状态与这些性质之间的关系。 - To achieve this aim , the effect of oxygen and carbon content on the solar cell conversion efficiency are studied in this thesis . three parts are studied in our work , firstly , the effect of annealing on the oxygen and carbon content and minor carrier lifetime of cz - si are studied , then put it into the process of solar cell and compare the capability of solar cell in two process
作为该项研究的先期工作，首先以p型( 100 )太阳电池用直拉硅片为实验样品，摸索出热退火的最佳处理温度；然后用常规工艺制备了单晶硅太阳电池，测试效率；结果发现用经过热处理的硅片衬底制备的太阳电池比用没有经过热处理的硅片衬底制备的太阳电池其效率有明显改善。