热处理参数 meaning in Chinese
heat treatment parameter
Examples
- The change of the stress in the composite during the thermal cycling treatment can be evaluated through the analysis of resistivity . the parameters of thermal treatment also can be determined , such as the temperature , the time and the cycling times
通过电阻率分析可以确定复合材料热循环中的应力变化，确定热处理参数(即热处理温度、保温时间、循环次数) 。 - Powders properties of different phases such as the granularity , the shape and the component have been analyzed by the methods of sieving , gravity sedimentation , spectrophotometry , scan electronic microscope ( sem ) , transmission electronic microscope ( tem ) and x - ray diffraction ( xrd ) . the results show that technic of ball milling and parameters of heat treatments are important influencing factors to properties of cu - zn powders
采用筛分法、重力沉降法、分光光度法、扫描电镜法、透射电镜法和x射线衍射法对不同阶段的铜锌粉末的粒度、形貌、成分等性质进行了分析，结果表明：球磨工艺及热处理参数对铜锌粉的性能有重要影响。 - To find the parameters of preparation and annealing process associated with the best electrochromic properties of these films , following researches and experiments were carried out : to compare the visible light transmittance of the colored state with bleaching state of the electrochromic films which were annealed at different temperatures and for different duration , to count the dynamic optical density change , and to test the i - v relations of these films " electrochromic cycles and their colored / bleaching response time
对经过不同热处理温度和不同热处理持续时间得到的薄膜样品的着色褪色可见光范围内透射光谱的比较，计算薄膜动态光密度变化量的大小，测试薄膜着色褪色循环伏-安关系以及薄膜着色褪色响应时间的快慢，寻求到薄膜呈现最佳电致变色性能时所对应的制备参数与热处理参数。 - And then , zno thin films were synthesize on quartz and silicon substrates by sol - gel dip - coating and spin - coating . the properties of the films and the effects of growth parameters on the quality of zno films were studied using x - ray diffraction , optical absorption , photoluminescence techniques , etc . to modify the energy gap of the zno , mg2 + was added in the sol - gel solution , and mgxzn1 - xo films were prepared by the same method as that for zno films
利用溶胶凝胶法成功地在石英玻璃和单晶硅片等衬底上制备出了c轴择优取向的zno薄膜，并利用x射线衍射仪、紫外-可见光光谱仪、荧光光谱仪等对zno薄膜的结构和性能进行了测试、分析，并研究了热处理参数等条件对zno薄膜性能的影响。