炉冷 meaning in Chinese
cooling in furnace
furnace cooling
Examples
- But for the furnace cooling samples , all samples have another damping peak about at 3 00 ( called tp2 peak ) . the peak is not of relaxation model , the peak temperature does not vary with frequencies
除炉冷试样外，其余各热处理态试样均在300左右，有一内耗峰几2峰，此内耗峰无驰豫特性。频率变化，内耗峰的位置不变，对同一热处理态试样内耗峰位置不变。 - 5 . the comprehensive capacities of the azsm alloy were markedly promoted than that of the as - cast azsm alloy which was aged at 200 ? , air - cooled and furnace - cooled after solid - solution , aged at 90 ? and aged in nature after solid - solution
5 )铸态azsm合金经200时效3小时、固溶4小时后空冷和炉冷、 400固溶-水淬90时效和自然时效的综合性能较铸态有显著的提高。 - The activation energy of the tpl peak is calculated being about 1 . 5 ev for four heat treated samples ( furnace cooling , air cooling , dry ice quenching , liquid nitrogen quenching ) , and it is near the self diffuse activation energy of aluminum 1 . 45ev
炉冷、空冷、干冰冷和液氮冷四种热处理制度根据几，峰峰温数据计算的激活能的结果约为1 ? sev ，接近于铝的自扩散激活能1 . 45ev 。 - Over a 100 to 270 temperature range , the damping capacities are ranked from great to small as follows : sample cooled in furnace , sample cooled in the air , sample quenched at - 70 ( sample quenched at - 195 ) and sample quenched in water
在100 270范围内，不同热处理态材料阻尼能力的大小以次为：其炉冷空冷70淬火- 195淬火水淬。超过270 ，由于阻尼性能测试出现第二个内耗峰，不同热处理态试样阻尼性能的大小没有明显的规律性。 - In this paper , 6013al / sicp / gr metal matrix composite ( mmc ) was produced by spray codeposition , by means of changing the medium of quenching , influence of five types of heat treatment system ( furnace cooling , air cooling , water quenching , dry ice quenching , liquid nitrogen quenching ) and different aging temperature on the damping was studied systematically
本文采用喷射共沉积方法制备了6013al sicp gr金属基复合材料( mmc ) ，通过改变淬火介质，较为系统地研究了五种热处理制度(炉冷、空冷、水冷、干冰冷及液氮冷)以及不同时效温度( 120 、 150 、 170 、 190及210 )对6013al sicp grmmc阻尼性能影响。