滑移变形 meaning in Chinese
slip deformation
Examples
- Mechanical model and basic characteristics of toppling displaced mass
倾倒滑移变形体的基本特征及力学模型研究 - Deformation mechanism and control of mining - induced toppling - displacement
采矿引起的倾倒滑移变形机理及其控制 - Where , joint deformation contain slip of longitudinal reinforcement passing through joint and shear deformation of joint
其中，节点区变形包括贯穿节点梁筋的滑移变形和节点剪切变形。 - Abstract : based on the study on the deformation of largescale toppling rock mass in fushun west open pit , this paper research the features of deformation and failure of the soft rock slope controlled by weak intercalated beds , and its influence on urban industry establishment
文摘:以抚顺西露天矿大规模倾倒滑移变形体变形规律研究为例，探讨受软弱夹层控制的软岩边坡变形破坏规律及其变形破坏对城市工业设施的影响。 - ( 5 ) rock mass stability analysis on dam abutment of xia luo - yu damsite as follows : in left dam abutment , sideslip control structure has been relatively integrate , and low dip angle jointing did n ' t develop , so integrate sliding deformation control structure could n ' t been formed in three - dimensional space and rock mass stability could n ' t been influenced badly ; in right dam abutment , indicate rock mass distortion was caused by the rock mass mechanics condition , such as specific rock mass structure , compression stress concentrate with high strength and especial landform and so on
( 5 )对下落鱼坝址坝肩岩体稳定问题的分析得出：左坝肩岩体虽然具有相对较完整的侧滑控制结构，但由于缓倾角节理不发育，故在三维空间上不能形成完整的滑移变形控制结构，亦不会对坝肩岩体稳定性产生严重影响：右坝肩岩体复杂变形，是在特定的岩体结构、高强度的压应力集中及特殊的地形等不可或缺的岩体力学条件下产生的。