湿氧 meaning in Chinese
steam oxide
Examples
- The parabolic rate constant b is substantially larger for wet oxidation than for dry .
在湿氧氧化中抛物线速率常数B比干氧氧化中的大得多。 - The parabolic rate constant b is substantially larger for wet oxidation than for dry
在湿氧氧化中抛物线速率常数b比干氧氧化中的大得多。 - And in the three mediums ( argon , dry oxygen , wet oxygen ) , the damage in the wet oxygen was the most severe
三种介质中，以湿氧环境中的损伤最为剧烈。 - Thermal shock behavior and interaction fatigue - creep of 3d - c / sic had been investigated in the three environments ( argon , dry oxygen , wet oxygen ) in the preset work
本文研究了3d - c sic在空气介质下的热震损伤规律和在三种介质(氩气、干氧和湿氧)下的疲劳蠕变的损伤规律。 - The tested materials include ( 100 ) silicon wafer , ( 110 ) silicon wafer , poly - silicon thin film , dry oxidized silicon dioxide thin film , wet oxidized silicon dioxide thin film , lto thin film , standard lpcvd silicon nitride film , low stress lpcvd silicon nitride film , alumni nitride film , zinc oxide film etc . in the nanoindentation experiment of the single crystal silicon , two different mechanical phases are observed at different indentation depth
用纳米压入法对( 100 )单晶硅及( 110 )单晶硅、多晶硅薄膜、干氧薄膜、湿氧薄膜、 lto薄膜、标准氮化硅薄膜、低应力氮化硅薄膜、氮化铝薄膜、氧化锌薄膜等重要材料的杨氏模量和纳米硬度进行了系统地测量。报道了单晶硅在压入过程中观测到的两个力学相的变化。