液滴直径 meaning in Chinese
bu le diameter
bubble diameter
Examples
- The variation of the operating condition did not change the distributive range magnitude of the dispersed phase droplet
螺杆转速和挤出机产量的变化对末端分散相液滴直径的分布范围影响不大。 - 5 . the preparation of o / w type microemulsion of hhophg baffe microcmulsion is primarily approached and researched , through which it is notcd that barva can form microcmulsion
O w型bapta微乳液组装的初步探讨以水为分散剂，成功地制备了o w型bma微乳液，其液滴直径分布较窄，液滴大小均匀。 - When the droplets were in large diameter , the surface morphology would be more rough and heterogeneous . the surface morphology would be porous when the droplets were too small
过大的液滴使薄膜表面不均匀，液滴过小又会使薄膜表面形成孔洞，只有液滴直径在一定范围内制备的薄膜才能满足要求。 - In these methods mechanical agitation or high pressure are usually used , which cost too much energy and can ' t get uniform liquid droplets membrane emulsification is one of the best methods to prepare emil1sion
这种方法所需压力很小，形成的液滴直径均一，并能形成不同粒径的乳液，是理想的制乳方法。 - Using three - dimensional particle trajectories dispersed droplet diameter at the outlet of screw element during compounding in a co - rotating intermeshing twin - screw extruder was computed
摘要用物料三维流动路径结合分散模型计算了螺纹元件出口处分散相液滴的直径，分析了螺杆转速、挤出机产量和液滴初始直径对末端分散相液滴直径的影响。