浸入深度 meaning in Chinese
immersion depth
Examples
- Usable minimum immersion depth
最小可用浸入深度 - Designed immersion depth
设计浸入深度 - Abstract : according to the character and actual condition of rh in shanghai baogang , molten steel flow in ladle and its effect on decarburization were studied with a three dimension turbulent flow and concentration modelling . the results show that , within a certain range , the decarburization rate increases not only with the increase of snorkel diameter and ar fluid flow but also with the decrease of the immersed depth of the snorkel
文摘:根据上海宝钢rh的特点和实际情况，建立了三维流场、浓度场程序，对钢包内钢水的流动、处理过程的脱碳进行了研究，并对它们的影响因素进行了分析.结果表明，在一定范围内增加循环管直径和吹气流量、减小浸渍管浸入深度有助于提高脱碳速度 - The results show that the more deeper the nozzle immersion depth is , the less the molten steel velocity at the interface , the weaker the oscillation near the interface and the more difficult the occurrence of the slag entrapment become . compared with the round entry nozzle , the rectangular entry nozzle can reduce the occurrence of the slag entrapment
结果表明:采用较大的水口浸入深度可以减小表面速度,抑制液面波动,避免钢渣卷混的产生;与圆形水口相比,长方形水口能有效地减小卷渣发生的可能性。 - Detailed predictions on the fluid flow in mold and in cavity of nozzle working end were obtained at different side - hole angle and submerged depth of nozzles , and then the flux variation of liquid steel passing through central hole of the three - hole nozzle and the fluctuation of liquid steel in mold were inspected based on above predictions
针对3孔浸入式水口不同侧孔倾角和浸入深度，数值模拟对结晶器内钢水流动做出了较为详细的预报，研究工作就此分别考察了水口中心孔流量变化和钢水液面波动幅度。